order
info
data
Sie sind hier: Devices > Solo > Solo DL
Solo DL
Solo DL
photo photo photo
Data logger with integrated GPS and linking to the engine control unit.
delivery status: available for immediate delivery
article number description Info image /unit* order
OSOLODL-01Solo DL, with USB, 12V & OBD-cable, charger, bracket Solo DL
600,00 €
  Place in cart
OSOLODL-02Solo DL, with USB, 12V & CAN-cable, charger, bracket Solo DL
600,00 €
  Place in cart
* prices incl. VAT plus package and delivery.
The latest development from AIM is called Solo . Available in two versions, it can either be used as a pure GPS-Lap timer or as a data storage device.

The version Solo disposes over all functions, which are needed for Operations like for example Regularity, Dragster, Circuit, mountain race... Over USB the wanted track coordinates are transmitted to the SOLO or the driven measurement data to the analyses to the PC. Thanks to the 12V connection, it can also be supplied over the power supply network through an internal battery.

The version SoloDL has additional an integrated data logger, which records, shows and safes the data via OBD II or vehicle—CAN-bus (at the moment AIM can communicate with approx. 300 control units).

The Dash logger as also the lap timer, disposes over an internal 3 axis acceleration sensor and an integrated 10 Hz GPS. The internal ring memory summarizes 8 MB and can record with a sum scan rate from 2.000 Hz with 12bit recording resolution.




Logo CAN-Bus Technologie
CAN-Bus Technology

Special features SoloDL

  • Lap times with up to 5 split times
  • Triaxial acceleration sensor
  • Rechargeable lithium battery
  • 16 MB storage
  • Integrated GPS module
  • Various modes (regularity, circuit, hill climbs, point to point)
  • ECU interface CAN, K-Line, RS232 (only SoloDL)


Connection example SoloDL

Anschlussbeispiel AiM SoloDL

Technical data AiM SoloDL

Tachometer Pickup over CAN, RS232 or OBDII
Speed Pickup over CAN, RS232, OBDII or GPS
Time measurement over GPS
  - measuring accuracy 1/100 sek.
  - up to 5 split times
  - Start- and finish line separate settable
  - Predictive lap time
Acceleration triaxial acceleration sensor ± 6g
Sum scan rate 2000 Hz
Connector 1x socket (Binder), 711, 5-pins | 1x socket (Binder), 711, 7-pin | 1x Mini-USB
Data storage nonvolatile internal 16 MB memory
Power supply internal rechargeable lithium-battery
External 8 - 16V over power supply network
Updates Software- and firmware updates free over the internet
Admeasurements 98 x 78 x 30 mm
Weight 240 gr.
Protection class IP 67

Functions of the SoloDL

1 Number of laps 2 Number of satelites 3 State of charge of the battery
4 Indication of the lap time (indication free configurable) 5 USB connection 6 The function of the buttons is shown each in the row above
7 Connection for expanding the logger through for example Lambda 8 Connector for the connection to the engine control unit (CAN, RS232, OBDII)

Features SoloDL

Solo shows the best and current lap time on one page. Over the lap projection the driver is continuously informed over his to achieving lap time. It is also possible to indicate the time projection as difference. In the regularity mode it can be determined, which lap is to be taken for this.
Displayanzeige Rundenzeit Displayanzeige Differenz

On the free configurable display 4 pages with up to 4 measurement values can be showed. With the version DL additional the channels of the engine control unit can be showed.
Displayanzeige Seiten Displayanzeige ECU Kanäle

Solo recognizes automatically on which track you are. If there should be more track varieties available, Solo asks you to select the correct track. Likewise it is possible, to determine the sectors over the Solo. After driving you can view in the data recall your lap times and further information. All tests which are contained in the storage are shown.
Displayanzeige GPS Displayanzeige Data Recall

Technical Data Solo

AiM Solo

AiM SoloDL

Solo

Solo DL

GPS lap timer

RPM

-

CAN-Bus | RS 232 | OBD II

Lap time

GPS

GPS

Speed

GPS

GPS | CAN-Bus | RS 232 | OBD II
Acceleration

x

x

Lap time forcast

x

x

Time | Date

x

x

Altitude

x

x

Route | track recording

x

x

1/4 mile mode

x

x

Start/finish separated settable

x

x

Dash logger

Temperature -

x

Throttle position -

x

Brake pressure -

x

Steering angle -

x

Oil pressure -

x

Brake -

x

Gear -

x

Oil temperature -

x

Lambda -

x

x = possible
- = not possible
AIM Store by memotec Messtechnik | Bauwaldstrasse 1 | D-75031 Eppingen | +49.7260.920440 | info@aim-store.de | www.aim-store.com